Rear Axle and Brake Parts For Sale

To email us with questions or to order parts [Click here]

Original rear brake drum for 8N or NAA part number 8N1126. Good condition.
$30 - plus shipping


Rear brake support plate part number 8N2212. Fits 8N and NAA. Very good condition.
$45 - plus shipping


Rear brake dust shield plate part number 8N2255. Fits 8N and NAA. Good condition.
$35 - plus postage


All the brake hardware for both sides for 8N-NAA. Springs, spring hooks and adjusters. Good used originals.
$15 - plus postage


Left side brake actuating cam shaft part number 8N2247 or right side
part number 8N2246. Fits 8N and NAA. Very good condition.
$35 each - plus postage
Right Side Sold Out

Left side brake actuating cam shaft part number NCA2247A or right side
part number NCA2246A. Fits 600-800-601-801. Very good condition.
$35 each - plus postage

Left side brake actuating cam shaft part number NCB2247A
Fits 700-900-701-901. Very good condition.
$35 each - plus postage


Brake pedals for 8N in good condition. Left or right side.
$20 each - plus shipping


Brake pedals for 9N-2N in good condition. Left or right side.
$20 each - plus shipping
Left Side Sold Out


Left side brake rod and clevis for 8N tractors.
$15 - plus postage


Brake and clutch pedal cross shaft for 8N or NAA in good condition.
$15 - plus postage


Right side differential access cover w/dipstick hole part number 9N7158B.
Later style stamped steel. Fits all 9N-2N-8N tractors.
$15 - plus postage

Right side differential access cover w/dipstick hole part number NAA44026A.
Aluminum cover for NAA tractors.
$20 - plus postage


Right side differential access cover 9N7158. Aluminum, no dipstick.
Fits early 9N tractors.
$15 - plus postage



Original 8N pto shifter part number 8N721A. This is the stamped steel shifter plate used on the '48 to '52 8N. Will fit all 8Ns. Very good condition.
$15 - plus postage

Original NAA pto shifter part number NAA721. This is the aluminum shifter plate used on the '53-'54 NAA. Very good condition.
$20 - plus postage

Original pto shifter part number NCA721B. This is the aluminum shifter plate used on the '55-'64 600-800 tractors. Very good condition.
$20 - plus postage



Original 9N-2N cast pto shifter part number 9N721. Good condition.
$15 - plus postage



Original 8N pto shaft mounting flange 9N733B. No cracks, good threads.
$15 - plus postage



Original NAA pto shaft with 1-1/8" splines. Good condition.
$45 - plus postage



1-3/8" upgrade pto shaft for 9N-2N-8N tractors . Like new.
Sold


Complete differential carrier assembly with ring and pinion gears. Fits all 9N-2N-8N tractors. Very good condition, ready to bolt in.
$200 - pickup only - no shipping


Good used differential spider gear set with side gears for 9N-2N-8N tractors.
Sold

Good used spider gear set with side gears for 801-4000 series tractors (fine spline).
$85 - plus shipping


Good used set of 12 special differential ring gear mounting bolts and nuts for 9N-2N-8N tractors .
$40 - plus postage

Good used set of 12 special ring gear mounting bolts #NAA44215A and nuts for NAA tractors .
$45 - plus postage

Good used set of 16 special ring gear mounting bolts #NAA44215A and nuts for '55-'64 tractors .
$55 - plus postage


Used differential pinion gear 79-4609 fits all 9N 2N 8N tractors. Excellent condition, very little wear.
$85 - plus postage
Sold


Differential ring gear thrust block part number 8N4194. Fits all 8N tractors. No wear.
$10 - plus shipping


Oil trough part number 9N4150 for 9-2-8N tractors.
$10 - plus shipping


Replacement rear axle hub 8N1171 for 8N and NAA tractors. Bought new and never used.
$45 - plus shipping
Sold


Rear axle hub 8N1171 for 8N and NAA tractors. Very good condition.
$35 - plus shipping



Rear axle bearing retainer part # 8N4124A. Fits 8N to mid '52. Good condition.
$20 - plus shipping

Rear axle bearing retainer part # 8N4124B. Fits 8N after mid '52 and NAA. Accepts the integral seal. Can be used to replace 8N4124A. Good condition.
$25 - plus shipping
Sold


8N rear end center housing. Good condition, no cracks or stripped threads.
$120 - pickup only - no shipping

Jubilee-NAA rear end center housing. Good condition, no cracks or stripped threads.
$375 - pickup only - no shipping

601 - 2000 ('63-'64) rear end center housing. Good condition, no cracks or stripped threads.
$175 - pickup only - no shipping


Original 8N-NAA underbelly drawbar bracket with good original pin
$25 - plus postage
Sold


Original 600-601-800-801 underbelly drawbar bracket with good original pin
$25 - plus postage
Sold


Original 600-800 underbelly drawbar bracket with pin. Early style.
$25 - plus postage
Sold


Aftermarket universal sway bar brackets fit '39-'64 Fords and others.
$12 pair - plus postage


Brake shaft wedge 9N2050 for 9N and 2N tractors.
$15 - plus postage


Left side brake pawl arm 9N2324 for 9N and 2N tractors.
$15 - plus postage


Left side brake actuating arm part number 8N2315 and right side part number 8N2324. With pawls. Fits all 8N tractors.
$10 each - plus postage


Brake pawl sector plate part number 8N2796. Good teeth. Fits 8N tractors left or right side or NAA left side.
$10 pair - plus postage

Brake pawl sector plate part number 9N2796. Good teeth. Fits 9N-2N tractors left or right side.
$10 each - plus postage

Brake pawl sector plate part number NAA2796A. Good teeth. Fits NAA tractors right side.
$10 each - plus postage

Brake pawl sector plate part number NCA2796B. Good teeth. Fits 601 tractors left or right side.
$10 each - plus postage

Brake pawl sector plate part number NCB2796B. Good teeth. Fits 701-901 row crop tractors left or right side.
$10 each - plus postage

Brake pawl sector plate part number NDA2796B. Good teeth. Fits 800-801 tractors left or right side.
$10 each - plus postage


Trans to pinion gear coupling shaft part # 9N4605. Fits all 9N-2N-8N tractors.
$25 - plus postage

Trans to pinion gear coupling shaft part # NAA4605A. Fits all NAA tractors.
$35 - plus postage

To email us with questions or to order parts [Click here]

Back to the Parts For Sale index
Back to the 8N home page