Used 9-2-8N Engine Parts For Sale
Email John Smith
smith8n@att.net with questions or to order parts.
Good used distributor assembly for 9N-2N and 8N with front mount.
Excellent condition. It has been disassembled, cleaned and inspected, and reassembled with any new parts it needed.
Comes complete with coil and a new mounting gasket. Your choice of 6 or 12 volt coil. Set up and ready to install.
$130 - plus postage
Sold
Good used distributor assembly for 9N-2N and 8N with front mount.
Excellent condition. It has been disassembled, cleaned and inspected, and reassembled with any new parts it needed.
Has new points and new cap. Set up and ready to install, just add your coil.
$120 - plus postage
Complete distributor cam and weight assembly 8N12176. NOS genuine Ford. Fits '50 - '52 8N side distributor.
$50 - plus postage
Good used governor 8N18204 for early 8N with front mount distributor (no proofmeter drive). Has been disassembled, cleaned and inspected, any worn parts replaced, and has new balls. Excellent condition, ready to install.
$120 - plus $11 shipping (US only)
Good used governor 8N18204B for 8N with side mount distributor (has the Proofmeter drive). Has been disassembled, cleaned and inspected, any worn parts replaced, and has new balls. Excellent condition, ready to install.
$130 - plus $11 shipping (US only)
Good used governor 9N18200C for later 9N or 2N tractors. Aluminum housing. Has been disassembled, cleaned and inspected, any worn parts replaced, and has new balls. Excellent condition, ready to install.
$120 - plus $11 shipping (US only)
Good used governor 9N18200B for later 9N or 2N tractors. Cast iron housing WITH factory oil hole. Has been disassembled, cleaned and inspected, any worn parts replaced, and has new balls. Excellent condition, ready to install.
$110 - plus $11 shipping (US only)
Complete governor internal rotating assembly part number 9N8N18179CA. New, old replacement stock. Fits all 9N-2N-8N governor housings.
$115 - plus postage
Original oil line junction block fitting part number 8N6722. Fits all 8N tractors. Good threads.
$15 - plus postage
Original oil pump pickup tube for 9N-2N-8N part number 9N6615 or 8N6615. Good condition.
$40 - plus postage
Used original oil pump/front main 9N6603 for 9N-2N and early 8N engines. Has 9/16" gears.
$35 - free shipping (48 states)
Used original oil pump/front main 8N6603 for later 8N engines with 3/4" gears.
$45 - free shipping (48 states)
Sold
Used original center or rear main bearing caps for 9N-2N-8N engines.
$10 each - plus postage
New oil pump rebuild kit APN6600B (Ford) with 3/4" gears.
$25 - plus postage
New oil pump rebuild kit APN6600B (Ford) with 3/4" gears.
$25 - plus postage
New oil pump rebuild kit APN6600B (aftermarket) with 3/4" gears.
$20 - plus postage
Original round shaft engine oil dipstick part number 9N6750. Fits all 9N-2N-8N tractors.
$15 - free shipping (48 states)
Original crankshaft pulley 8N6312 in very good condition. Runs straight and true. Little or no wear on seal surface. Fits all 9N-2N-8N tractors.
$30 - plus postage
One piece steel crankshaft pulley. Allows use of a drive plate to power a loader pump. Has four 1/4" bolt holes. Replaces the 8N6312 pulley. Fits all 9N-2N-8N tractors. Good condition.
$30 - plus postage
Original front crankshaft drive ratchet part number 2N6319 allows the use of a handcrank to start your tractor.
Good shape, no broken teeth. Fits all 9N-2N-8N tractors.
$20 - free shipping (48 states)
Good used connecting rods part number 9N6200. Fits all 9N-2N-8N tractors.
$20 each - free shipping (48 states)
Used original crankshaft for 9N-2N-8N engines. Previously reground to .010" under on mains and rods. Has .002" to .003" wear. Should regrind nicely at .020" under.
$75 - plus shipping
Sold
Original aluminum front timing cover part number 8N6019B. Good shape.
Fits all 8N engines with side mount distributor.
$75 - free shipping (48 states)
Sold
Original cast iron front timing cover part number 9N6019. Good shape.
Fits all 9N-2N-8N tractors with front mount distributor.
$40 - free shipping (48 states)
Original oil fill tube for front distributor 9N-2N-8N tractors. 8N6763.
$15 - free shipping (48 states)
Sold
Original oil fill tube for side distributor 8N tractors. 8N6763B.
$20 - free shipping (48 states)
Sold
Camshaft part number 8N6250. Fits all 8N tractors with side mount distributor.
Very good condition.
$60 - free shipping (48 states)
Camshaft part number 2NC6250. Fits all 9N-2N-8N tractors with front distributor.
Very good condition.
$60 - free shipping U.S. only
Aluminum camshaft timing gear part number 7RA-6256-A. Will fit all 9N-2N-8N tractors. Like new condition.
$20 - plus postage
Aluminum camshaft timing gear part number 7RA-6256-B (+.006"). Brand new (NOS) genuine Ford.
$40 - plus postage
Steel crankshaft timing gear part number 48-6306-A. New, old replacement stock.
$25 - plus postage
Camshaft thrust spring spacer 8N6276. Fits all 9N-2N-8N tractors with front distributor (and aluminum gear).
$20 - free shipping (48 states)
Sold
Governor mounting plate part number 9N6017. Fits all 9N-2N-8N tractors with front distributor.
$20 - free shipping (48 states)
Governor mounting plate part number 8N6017. Fits all 8N engines with side mount distributor.
$40 - free shipping (48 states)
Sold
Rear crankshaft seal retainer part number 8N6335 or 91A6335. Fits all 9N-2N-8N tractors.
$15 - free shipping (48 states)
Side valve cover plate part number 7HA6520. Fits all 9N-2N-8N tractors.
$4 each - plus postage
Oil filter housing for 9N-2N-8N tractors.
$30 - free shipping (48 states)
Front crankshaft oil slinger plate part number 40 6310A2. Fits all 9N-2N-8N tractors.
$2 - plus postage
Sold
Email John Smith
smith8n@att.net with questions or to order parts.
Back to the Parts For Sale index
Back to the 8N home page