Rear cover plate 312059 or NCA893A for NCA600F or D piston pump. Good condition.
Piston pump center body section 311142 with springs and pistons for '53-'54 NAA600D piston pump. Good condition.
Hydraulic pump manifold 310878 for '57 - '64 "01" and 2000-4000 series tractors with piston style pump.
Rebuilt piston type hydraulic pump NCA600F. Fits '55-'64 tractors. Has been totally disassembled, cleaned and inspected, and reassembled with any worn parts replaced and new bearings and seals installed. Excellent condition.
Lift control quadrant part number 9N515A3. Fits all 9N-2N tractors.
Upper lift cover housing part number 9N501. Fits all 9N-2N tractors . Good condition, no cracks.
Hydraulic lift cover blockoff plate C5NN476B for '65-'73 tractors.
Original aluminum lift control quadrant friction plate part number 2N516A.
Original lift control lever part number 2N512. Fits all 9N-2N-8N tractors.
Original lift control lever part number NCA512A. Fits all '53-'64 tractors.
Hydraulic lift ram arm part number 9N545. Fits all 9N-2N tractors. Good shape.
Original upper lift arm for all '55-'64 hundred series and early thousand series tractors.
Original left side link rod NCA564B for 600-601 - 800-801 tractors.
Original single hole top rocker part number 9N535 for 9N and 2N tractors.
Pair of original check chains with brackets and clevis links for 9N-2N-8N-NAA tractors. Good condition.
Pair of original lower lift arms for 9N-2N-8N-NAA tractors. Good condition. Ball ends are much better than average.
Draft control spring seat support part number 2N624. Fits 9N-2N-8N-NAA and '55-'64.
Draft control plunger guide plate 8N527 or 957E527. Fits 9N-2N-8N-NAA and '55-'64.
Hydraulic lift draft control plunger part number 8N541A.
Draft control link assembly part number 8N540. Includes 8N539 spring,
Drawbar control arm assembly part number 8N680. Includes 8N684 spring,
Linkage control lever part number NAA504. Fits all '53-'54 NAA tractors.
Hydraulic lift control lever shaft part number 8N517. Has some wear but still usable. Fits all 8N tractors.
Rear hydraulic control lever arm part number 8N504. Straight. Fits all 8N tractors.
Ram arm to piston "dogbone" rod part number 9N526. Fits all 9N-2N-8N-NAA tractors.
Draft control spring yoke part number 9N546. Fits 9N tractors with 18 threads on the plunger rod.